Shopping cart

close
  • No products in the cart.
Free shipping on orders over $50 & Lifetime Guarantee
BackBack

Comfort Plus Insulated Air Sleeping Mat

The most awarded mat of all time

$139.96 – $229.95

Size Guide

Sleeping Bag Temperature Ratings Explained

The EN Rating scale is a scientific test to determine the warmth of a sleeping bag. The test produces a Lower rating (for male sleepers) and a Comfort rating (for female sleepers). Both are listed in the features table on the product page.

A unisex sleeping bag with a Lower limit of 23ºF means a man should be comfortable down to air temperatures of 23ºF. The same bag will also have a Comfort limit, in the realm of 32°F, so a woman would be comfortable down to an air temperature of 32ºF. These ratings require a sleeping mat with an R-Value appropriate for expected ground temperatures – without this, the sleeping bag itself is unlikely to keep the sleeper warm enough.

A variety of factors impact sleeping bag warmth - the above temperatures are merely guidelines, not guarantees. It’s important to think of a sleeping bag, an appropriately insulating sleeping pad and a liner as a sleep system. For example - if you plan on sleeping in nighttime air temperatures of 27ºF / -3°C, choose a bag with a gender-appropriate rating of 23°F / -5°C, plus a sleeping mat with an R-Value of 2.5 to 3, and consider a Reactor thermal liner.

$199.95
Description

The Comfort Plus™ Insulated Sleeping Mat earned its Backpacker Editors' Choice award, 2015 for a combination of its Air Sprung Cell™ technology and dual layer comfort. With two separate layers of interlocking air chambers and our multi-function valve, the sleeper can fine-tune the top layer to perfection, and adjust the base layer to accommodate for rough terrain. The built-in redundancy is not to be taken lightly - if one side of the mat punctures, the other is still able to function until a repair is made. It's insulated with Thermolite® and Exkin Platinum® for great warmth.

Read about the care and use of your Sea to Summit Air Mat HERE

Highlights

Weight

Regular: 27.6 oz  Chocolate hazelnut butter in a large jar, because why mess with the smaller stuff?

Packed Size Comparison

Little larger than a wide mouth water bottle (BPA free of course)

Performance

4 Season: You'll be ready for Everest or just a regular summer night

Durability

The strongest face fabric and laminate available in a backpacking air mat. It’s a statement of tough love – we make things tough, so you will love them

Features

  • R-Value of 5
  • Exkin Platinum® fabric and Thermolite® insulation are combined to prevent heat loss
  • Multi-function valve for fast and easy inflation, deflation and fine tuning of air pressure
  • Liquid extrusion TPU lamination bonds to the mat face fabric more consistently than a film, virtually eliminating delamination issues common in other mats
  • An anti-microbial treatment is added to the TPU to prevent issues caused by warm, moist air trapped inside the mat
  • Comes with a quality stuff sack which doubles as a pump, a repair kit containing six self-adhesive patches for repairing punctures in the field, and two spare silicone one-way valve inserts

Technical Features

Dual Layer Air Sprung Cells™

Air Sprung Cells™ are the core technology used in Sea to Summit Air Mats and are the reason you will sleep more comfortably on a Sea to Summit mat than on a conventional air pad. Inspired by the hundreds of springs found in a modern pocket sprung mattress, the hundreds of small interconnected chambers (called Air Sprung Cells™) perfectly support your weight and conform to your body contours.

The Comfort Plus series of mats has an internal layer of 40 Denier Nylon dividing the mat into an upper and a lower chamber. This allows the welds of the lower and upper cells to be offset throughout the entire mat, resulting in the greatest possible support and insulation, and a unique ability to fine-tune comfort. When on uneven terrain the bottom layer of the mat can be inflated to a high pressure as a barrier. The upper layer can then be adjusted - using the fine tune valve – for more comfort and softness.

This also ensures a level of built-in redundancy. If one layer becomes punctured, you can still get through the night with the other layer of the mattress intact.

Dual layer construction air mats are perfect for those looking for the ultimate in comfort and insulation, who are prepared to carry a few more ounces

Integrated AirStream™

The Airstream™ Pumpsack is Sea to Summit's big volume mattress pump which we've now integrated into the stuff sack of every Air Sprung Cell™ mat. The clever design opens at one end to stow the air mat and the other end unfolds to become the built-in pump.

The Airstream™ Pumpsack can be inflated with a single breath and takes just two or three cycles to fill our mats. Not only is it faster than inflation by mouth, but there is minimal breath condensation entering the mat and it eliminates dizziness from blowing the mat up directly by mouth.

The Airstream™ Pumpsack is also compatible with Sea to Summit's smaller multifunction valve, which is now featured on the updated Aeros pillow range, along with the Air Seats.

Exkin® Platinum

This is a very lightweight non-woven fabric that has a thin metalized layer applied to the surface. Exkin® Platinum thermal technology reflects radiant heat back to the user. Unlike reflective films used in conventional sleeping pads, Exkin® Platinum is silent.

Thermolite® HL-1

Thermolite® HL-1 is part of the family of Thermolite® materials used in Sea to Summit sleeping bags, sleeping bag liners and sleeping mats. HL-1 high loft insulation is a fiberfill constructed with a unique 3D crimp of hollow-core and solid fibers, which provides excellent lightweight warmth with superior durability. The Thermolite insulation lofts up inside the Air Sprung Cells™ of our sleeping mats to prevent convective heat loss from your warm body to the cold ground.

Tech Specs

Product Details

Best Use
Backpacking, Camping, Winter Camping, Bike Touring
Comes With
Airstream Pumpsack / Stuff Sack and a mat repair kit
Fabric
40D Nylon Face Fabric
Insulation
Exkin Platinum fabric and Thermolite
R-Value
5
Season Rating
4 Season
Special
Extrusion TPU Lamination to reduce delamination
 
SMALL
REGULAR
LARGE
REGULAR RECTANGULAR
LARGE RECTANGULAR
# AIR SPRUNG CELLS
DIMENSIONS
PACKED SIZE
SHAPE
THICKNESS
WEIGHT
514
66 in x 21.5 in / 168 x 55 cm
5 x 9 in / 12 x 23 cm
Tapered
2.5 in / 6.3 cm
25.2 oz / 715 g
548
72 in x 21.5 in / 184 x 55 cm
5 x 9 in / 12 x 23 cm
Tapered
2.5 in / 6.3 cm
27.6 oz / 785 g
696
79 in x 25 in / 201 x 64 cm
5 x 10 in / 12 x 26 cm
Tapered
2.5 in / 6.3 cm
36 oz / 1015 g
590
72 in x 21.5 in / 184 x 55 cm
5 x 9 in /
Rectangular
2.5 in / 6.3 cm
32.4 oz / 920 g
788
80 in x 26 in / 203 x 65 cm
5 x 10 in / 12 x 26 cm
Rectangular
2.5 in / 6.3 cm
39.5 oz / 1120 g

Customer Reviews

Based on 53 reviews Write a review
Scroll To TopScroll To Top