You may have noticed that several Sea to Summit products include the term ‘RF-Welded’ in the description. Just what does this term mean? Well, that’s a question that we get asked with some frequency…
Please excuse the pun but we just couldn’t resist. You see, “RF” stands for “Radio Frequency”, and is a term used to describe a process for joining materials together. Here is a good way to visualize how this process works:
Imagine a radio transmission antenna, and a radio reception antenna. Put the two close to one another and switch on the transmitter: the high-frequency electromagnetic energy would stream from the transmitter to the receiver.
Now imagine that we lay two pieces of material in between the two antennae.
When we switch on the transmitter, it would cause the molecules in the material to become excited, thus melting the material and fusing it together. The resultant bond can be stronger than the surrounding material.
(Image above shows the set up for our Air Sprung Cell™ sleeping mats
prior to welding)
Not all materials are ‘weldable’ though – the welding process requires each piece of material to have a surface which will melt to the other material.
Some weldable materials are stiffer than a similar-weight coated material with a non-weldable face fabric. This is one of the primary reasons that Sea to Summit does not use RF welding for all of its dry sacks – e.g. the fabrics used for Lightweight Dry Sacks and Big River Dry Bags are really pliable/flexible, and this allows them to be squished into spaces that conventional laminate dry sacks will not go. The non-welded dry sacks in our range are sewn together, then seam taped.
(Image above shows the sewn-and-taped seam of a, really squishable, Lightweight Dry Sack)
For certain applications, weldable laminates can offer advantages in terms of strength-to weight; which is why we offer fully-welded products in the case of our Stopper and Clear Stopper Dry Bags as well as our Hydraulic Dry Bags and Dry Packs.
(Image above shows Hydraulic Dry Bag detail)
“There are differences in the quality of welding produced in different factories. There are also differences in the strength of the laminated materials being welded together. In other words, not all welded air mats are created equal.”
One product range which would be unthinkable without RF Welding is the Air Sprung Cell Mats.
(Image above shows RF dot welds on an Air Sprung Cell™ Mat)
As those other blog posts recount, Sea to Summit’s air mats are made in a factory which builds aeronautical and medical products. The manufacturing standards in this facility are second-to-none; which helps explain the very high quality of the welds (and thus the extremely small number of weld issues we have experienced). At this point, however, it is worth mentioning that not only are there differences in the quality of welding technology, but also in the strength of the laminated materials being welded together. In other words, not all welded air mats are created equal or have the same reliability record – as you can discover by reading through some online reviews.
(Image above shows Aeros™ Premium Pillow and Folding Bucket)
Our new inflatable Pack Racks car roof transportation system (which won two awards at the Outdoor Retailer Trade show) is another product which showcases very high quality laminated material with RF Welds.
(Image above shows Pack Rack detail)
And – there are more welded products in the works. As they say in other realms where radio frequencies are used, stay tuned!